That looks very similar to the push cylinder on mine should imagine there will be a similar master cylinder under the false tank....Deep Diver wrote: ↑Sat Dec 15, 2018 2:24 pm This is the hydraulic kit made by CNC. The cylinder pulls the clutch arm.
https://www.limebug.com/product/view/17 ... k-523#temp
Gorbees vw trike
-
- Moved in and now we can't get rid
- Posts: 1411
- Joined: Fri Mar 18, 2016 5:53 pm
- Location: Essex
- Contact:
Re: Gorbees vw trike
The older i get the earlier it seems to get late.
- Aztec
- Applier of sticky tape
- Posts: 2810
- Joined: Mon Dec 19, 2011 11:35 am
- Location: A Geordie In Warwickshire
Re: Gorbees vw trike
When you said it looked like a vw master cylinder at the gearbox end i got a bit interested.
-
- Moved in and now we can't get rid
- Posts: 1411
- Joined: Fri Mar 18, 2016 5:53 pm
- Location: Essex
- Contact:
Re: Gorbees vw trike
After seeing Barry's link that's the set up on mine sorry to get your hopes up but being i am a bit ignorant about vw's at the moment it looked to me like a normal beetle master cylinder at first sight.
The older i get the earlier it seems to get late.
- Aztec
- Applier of sticky tape
- Posts: 2810
- Joined: Mon Dec 19, 2011 11:35 am
- Location: A Geordie In Warwickshire
Re: Gorbees vw trike
I thought someone had come up with a cheaper way of doing it.
-
- Moved in and now we can't get rid
- Posts: 3557
- Joined: Sun Jan 29, 2017 12:17 pm
- Location: Felixstowe
Re: Gorbees vw trike
I tried to be normal once, worst two minutes of my life.
Barry the cantankerous old goat.
Barry the cantankerous old goat.
-
- Moved in and now we can't get rid
- Posts: 1411
- Joined: Fri Mar 18, 2016 5:53 pm
- Location: Essex
- Contact:
Re: Gorbees vw trike
That's it for down the shed can't do anymore, waiting for paint to dry,weld up the bracket to the backrest plate just needs welding to a piece of angle iron that was conveniently placed behind the seat on the frame, think the original builder was going to fit a passenger grab bar at one stage, i'm not "if you can't see her she's fallen of attitude" not very happy with the quality of the backrest,stitching etc Chinese rubbish but hey it was cheap will do the job for now, Change later if necessary.
The older i get the earlier it seems to get late.
-
- Moved in and now we can't get rid
- Posts: 1411
- Joined: Fri Mar 18, 2016 5:53 pm
- Location: Essex
- Contact:
Re: Gorbees vw trike
Here's one for us Barry, and probably some others to
You do not have the required permissions to view the files attached to this post.
The older i get the earlier it seems to get late.
-
- Moved in and now we can't get rid
- Posts: 1836
- Joined: Fri Mar 09, 2012 10:06 pm
- Location: Midsomer Norton. Bath
Re: Gorbees vw trike
Yup Thats me right enough.
-
- Moved in and now we can't get rid
- Posts: 3557
- Joined: Sun Jan 29, 2017 12:17 pm
- Location: Felixstowe
Re: Gorbees vw trike
And me
I tried to be normal once, worst two minutes of my life.
Barry the cantankerous old goat.
Barry the cantankerous old goat.
-
- Moved in and now we can't get rid
- Posts: 1411
- Joined: Fri Mar 18, 2016 5:53 pm
- Location: Essex
- Contact:
Re: Gorbees vw trike
Busy boy this morning, welded backrest bracket on & gave it a coat of paint,cut & shut the ali handlebars, used wooden dowels as slugs for a temporary fit until the ali round billet arrives,lot better riding angle now only had to twist them round 9mm to get the right position.Got to paint rear mud guards & recover back set over xmas then it's just check rear brakes & a complete service ready for spring I think i may have a seized brake cylinder as the pedal is very hard & it takes a lot of foot pressure to stop All other brakes are fine hand,& front brake good,saving grace is it came with two new rear cylinders & two new master cylinders, going to replace the lot anyway & may be new drums if needed.Hay ho & away we go.
The older i get the earlier it seems to get late.