gorbees honda trike
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: gorbees honda trike
If it's all good bite his hand off
-
- Moved in and now we can't get rid
- Posts: 3550
- Joined: Sun Jan 29, 2017 12:17 pm
- Location: Felixstowe
Re: gorbees honda trike
The pushrod seals require the head removed. If it's fitted with the adjustable rod tubes then you don't need to remove the head. All you need is the rockerbox gasket. It's a easy job and can be done in a few hours. If you need a hand I can pop over .
I tried to be normal once, worst two minutes of my life.
Barry the cantankerous old goat.
Barry the cantankerous old goat.
-
- Moved in and now we can't get rid
- Posts: 3550
- Joined: Sun Jan 29, 2017 12:17 pm
- Location: Felixstowe
Re: gorbees honda trike
If you get it and not happy then sell it on for around 3k.
I tried to be normal once, worst two minutes of my life.
Barry the cantankerous old goat.
Barry the cantankerous old goat.
-
- Moved in and now we can't get rid
- Posts: 1411
- Joined: Fri Mar 18, 2016 5:53 pm
- Location: Essex
- Contact:
Re: gorbees honda trike
That's exactly what i was thinkingDeep Diver wrote: ↑Wed Jun 27, 2018 7:26 pm If you get it and not happy then sell it on for around 3k.
The older i get the earlier it seems to get late.
-
- Moved in and now we can't get rid
- Posts: 3550
- Joined: Sun Jan 29, 2017 12:17 pm
- Location: Felixstowe
Re: gorbees honda trike
If he gives you the seals you require 8 as all 4 tubes will need doing.
I tried to be normal once, worst two minutes of my life.
Barry the cantankerous old goat.
Barry the cantankerous old goat.
-
- Moved in and now we can't get rid
- Posts: 1411
- Joined: Fri Mar 18, 2016 5:53 pm
- Location: Essex
- Contact:
Re: gorbees honda trike
yes agree i would do all 8, would be using these if i get it don't need to take heads off with theseDeep Diver wrote: ↑Wed Jun 27, 2018 7:48 pm If he gives you the seals you require 8 as all 4 tubes will need doing.
The older i get the earlier it seems to get late.
- AngeloftheAbyss
- Part of the Furniture
- Posts: 990
- Joined: Thu May 11, 2017 9:14 pm
- Location: County Durham
- Contact:
Re: gorbees honda trike
OOOOOOOOOOHHHHHHHgorbee01279 wrote: ↑Wed Jun 27, 2018 8:37 pmyes agree i would do all 8, would be using these if i get its-l400.jpgdon't need to take heads off with theseDeep Diver wrote: ↑Wed Jun 27, 2018 7:48 pm If he gives you the seals you require 8 as all 4 tubes will need doing.
Freedom has a price, the cost is buried in the ground
- Aztec
- Applier of sticky tape
- Posts: 2805
- Joined: Mon Dec 19, 2011 11:35 am
- Location: A Geordie In Warwickshire
Re: gorbees honda trike
I put sprung ones on mine, they cost a bit more than the std ones, however once fitted you can just forget about them........... Then the other oil leaks become apparent, well these VW's like to mark their territory.
-
- Moved in and now we can't get rid
- Posts: 1833
- Joined: Fri Mar 09, 2012 10:06 pm
- Location: Midsomer Norton. Bath
Re: gorbees honda trike
Remove the rocker shafts and pushrods and you can break out the old tubes with out removing the heads. Make sure pushrods go back in same place.
- Aztec
- Applier of sticky tape
- Posts: 2805
- Joined: Mon Dec 19, 2011 11:35 am
- Location: A Geordie In Warwickshire