bobber tire help

Looking to Customise your trike? See this section for ideas 'where to' and how.
Post Reply
User avatar
phill cbx
Member
Posts: 15
Joined: Sun Feb 07, 2010 6:26 pm
Contact:

bobber tire help

Post by phill cbx » Fri Nov 03, 2017 9:50 pm

Hi all,
just coming to the final stages of my trike build she is a Honda CBX1000Z 6 cylinder, I have fitted a complete front end of a Honda Blackbird the tire size is a stock 120/70/17 however due to the style im after I need to fit a large style bobber tire on there, what sort of size should I be looking for.
Any help would be great ,
Thanks all

Regards Phill

Kawazuki
Part of the Furniture
Posts: 414
Joined: Sun Aug 28, 2011 4:51 pm

Re: bobber tire help

Post by Kawazuki » Sat Nov 04, 2017 11:20 am

With a std. Blackbird front end (yokes / forks) I think you'll struggle to fit anything much bigger and retain the disks and calipers. Bobbers usually had more spindley girder type forks so had more scope for fat front tyres? Also availability of 'bobber' type tyres in 17" could be a challenge.

Stix
Part of the Furniture
Posts: 442
Joined: Sat Jul 26, 2014 9:12 pm
Location: Ille et Villaine France

Re: bobber tire help

Post by Stix » Sat Nov 04, 2017 3:54 pm

Measure the gap between the fork legs at the narrowest point, probably between the mudguard mounts, then take off 15to 20 MM and that would be the widest tyre you could fit with a minimum clearance, as Kawasaki said you might struggle to find a tyre but you could look at car tyres to see if there is a suitably sized one.

Stix

Post Reply