PROJECT 4 VAN
-
- Part of the Furniture
- Posts: 412
- Joined: Sat Oct 25, 2008 11:41 pm
- Location: TELFORD
Re: PROJECT 4 VAN
waiting to move to new address 4 year ago
You do not have the required permissions to view the files attached to this post.
Last edited by biker69 on Tue Jan 13, 2015 3:16 pm, edited 1 time in total.
-
- Part of the Furniture
- Posts: 412
- Joined: Sat Oct 25, 2008 11:41 pm
- Location: TELFORD
Re: PROJECT 4 VAN
ready for the off.
You do not have the required permissions to view the files attached to this post.
Last edited by biker69 on Tue Jan 13, 2015 3:17 pm, edited 1 time in total.
-
- Part of the Furniture
- Posts: 412
- Joined: Sat Oct 25, 2008 11:41 pm
- Location: TELFORD
Re: PROJECT 4 VAN
the tinkerer, that little white thing is part of the handbrake assembly, one bracket is removed and welded back on in the horizontal position under the centre of the subframe and the twin cables are simply pulled forward to operate the shoes, so no one off bits machined.
You do not have the required permissions to view the files attached to this post.
-
- Part of the Furniture
- Posts: 412
- Joined: Sat Oct 25, 2008 11:41 pm
- Location: TELFORD
Re: PROJECT 4 VAN
more to follow in a few days time.
-
- Part of the Furniture
- Posts: 412
- Joined: Sat Oct 25, 2008 11:41 pm
- Location: TELFORD
Re: PROJECT 4 VAN
parking brake subframe mounted bracket (looking from the back to the front), normally the rest would continue straight up through the floor behind the seats.
You do not have the required permissions to view the files attached to this post.
-
- Part of the Furniture
- Posts: 412
- Joined: Sat Oct 25, 2008 11:41 pm
- Location: TELFORD
Re: PROJECT 4 VAN
another view (looking front to back) in between the subframe and centre torsion bar support bush.
You do not have the required permissions to view the files attached to this post.
- UGLYMICK
- Part of the Furniture
- Posts: 805
- Joined: Tue Jun 18, 2013 12:45 pm
- Location: HASTINGS EAST SUSSEX
Re: PROJECT 4 VAN
had the engine running in the trike yet as we had lots of problems with the ecu.s for a smart car engine in a trike
Last edited by UGLYMICK on Mon Jan 19, 2015 7:19 pm, edited 1 time in total.
-
- Part of the Furniture
- Posts: 412
- Joined: Sat Oct 25, 2008 11:41 pm
- Location: TELFORD
Re: PROJECT 4 VAN
bracket repositioned with brake cables passed between subframe and bush bracket, simple as.
You do not have the required permissions to view the files attached to this post.
-
- Part of the Furniture
- Posts: 412
- Joined: Sat Oct 25, 2008 11:41 pm
- Location: TELFORD
Re: PROJECT 4 VAN
3mm plate fashioned and welded in place for the master brake cylinder (set up for show)
You do not have the required permissions to view the files attached to this post.
-
- Part of the Furniture
- Posts: 412
- Joined: Sat Oct 25, 2008 11:41 pm
- Location: TELFORD
Re: PROJECT 4 VAN
not had the engine running since it was removed from the car but i dont really anticipate any problems with with it running again, all the original black boxes and fuse boxes are here for it so it could still be plugged into diagnostics if required. The later 700s and 1000s have far more electronic sensors to play up thats why i chose the 600 pulse.UGLYMICK wrote:had the engine running in the trike yet as we had lots of problems with the ecu.s for a smart car engine in a trike