I laid the bits out. I want it to be a two seater, but the passenger might burn their arse on the exhaust manifold.
Used up all my tube again on the rear loop and lower suspension mounts.
First Step
- Molehusband
- Member
- Posts: 123
- Joined: Tue Sep 02, 2014 12:18 pm
- Location: Cardiff
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: First Step
Them forks are cool
- Molehusband
- Member
- Posts: 123
- Joined: Tue Sep 02, 2014 12:18 pm
- Location: Cardiff
Re: First Step
Thanks mate.
- Molehusband
- Member
- Posts: 123
- Joined: Tue Sep 02, 2014 12:18 pm
- Location: Cardiff
Re: First Step
Got some more done between rain showers.
Rear cage.
Both ends.
Rear cage.
Both ends.
-
- Member
- Posts: 178
- Joined: Sun Jan 20, 2013 3:50 pm
- Location: Romford Essex
Re: First Step
im likeing this alot
- Molehusband
- Member
- Posts: 123
- Joined: Tue Sep 02, 2014 12:18 pm
- Location: Cardiff
Re: First Step
Thanks Adam.
I have hit a problem though. I was going to take off the struts and wishbones, & fit them to the frame first, but I have miss-judged the length of the rear frame.
Its not a complete scrap job, but I am going to upset my timetable by getting the engine and gearbox out of the car first, and drop it into the cage.
I have hit a problem though. I was going to take off the struts and wishbones, & fit them to the frame first, but I have miss-judged the length of the rear frame.
Its not a complete scrap job, but I am going to upset my timetable by getting the engine and gearbox out of the car first, and drop it into the cage.
-
- Moved in and now we can't get rid
- Posts: 2085
- Joined: Sat Jul 25, 2015 9:40 am
- Location: Bucks
- Contact:
Re: First Step
I'm no build expert and believe me I have made some real f**k ups in my time but why not get the motor out and in position and build the cage around it?
- Molehusband
- Member
- Posts: 123
- Joined: Tue Sep 02, 2014 12:18 pm
- Location: Cardiff
- Molehusband
- Member
- Posts: 123
- Joined: Tue Sep 02, 2014 12:18 pm
- Location: Cardiff
Re: First Step
Dunno what happened here.
Last edited by Molehusband on Fri Oct 02, 2015 9:19 pm, edited 1 time in total.
- Molehusband
- Member
- Posts: 123
- Joined: Tue Sep 02, 2014 12:18 pm
- Location: Cardiff
Re: First Step
Not done a lot. Mostly fully welded some joints, so I will post photo's of the frame when I can afford more metal.
I was taking the engine out, but in their wisdom, Nissan have fitted anti-tamper torx screws to various bits, so I am waiting for a set off Am*zon as well.
I was taking the engine out, but in their wisdom, Nissan have fitted anti-tamper torx screws to various bits, so I am waiting for a set off Am*zon as well.