Rewaco RF1 GT Rebuild.

[tiitvp]

Front lights
Front lights bar was bent so i maked new one and painted it. Cuted old one and used some parts of it.
Allsou ordered light and painted them same color as body. Lights that has park light into it is hard to get. Found them in Neatherland.
I allsou want to tarken the turning lights.

IMG_8317.JPG

IMG_8320.JPG

[tiitvp]

Dummy tank
There was radio in it so i removed it and repaired tank. Changed the location of the igniton lock allsou.
Hazard Switch and igniton lock where broken. Now they are new.

2016-03-26 14.08.24.jpg

2016-03-26 17.01.534.JPG

IMG_8319.JPG

[tiitvp]

Top plastic
As plastic that covers all the trike was badly damaged , then it need lot of repairing.
Last winter i project repaired on plastic boat, after that i know lot of that kind of plastic.
Removed all the color with sanding. Reapired all the holes, removed speakers. Added lot of puddy and try´d to do bad places myself before i take it to painter.
More pictures: http://www.trikedoctor.co.uk/forums/gal ... lbum_id=62

2015-12-18 19.28.51.jpg

2016-04-20 10.06.143.JPG

Finished can be seen at Ready Gallery: http://www.trikedoctor.co.uk/forums/gal ... lbum_id=53

[tiitvp]

Small Plastics and wing
Same as large plastic i removed all the paint then repaired and made them ready for painter.
This model havent back wing, so i maked it from toyota celicas wing.
Small plastics: http://www.trikedoctor.co.uk/forums/gal ... lbum_id=65
Wing : http://www.trikedoctor.co.uk/forums/gal ... lbum_id=61

2016-04-10 17.03.31.jpg

2016-04-07 21.22.06.jpg

2016-04-07 21.20.57.jpg

[tiitvp]

Brake Booster and Gear Shifter
I do not know how but brake booster was dented.
Make lot of research and founded what cars booster rewaco uses. Get new from ebay. Realy It was totaly new.
Brake booster FIAT CINQUECENTO 7744077
Gear shifter was allsou broke and again no code label.
Ordered new used one. Need to cut littlebit back end, but it is direct fit. Same way they cut it at rewaco.
Gear shifter Ford Fiesta 2S6R-7C453-MD

2016-05-26 07.52.53.jpg

2016-03-28 14.26.19.jpg

2016-04-28 19.41.11.jpg

[tiitvp]

Engine side
Work on engine:
All new belts
New spark plugs
new thermostat.
New map sensor - 2S6A-9F479-BA - only original ford works not some aftermarket.
New oils and filters.
New starter
New cooler lines.
throttle body plastic cover was broker- bought used new one. Changed only cover plastic.

Radiator had small dent, pressure test it, was ok. If someone need new(Copper) one its from Old Jeep Cherokke 4.0

2016-05-04 19.09.24.jpg

2016-04-20 10.09.31.jpg

2015-11-29 19.33.18.jpg

[Kawazuki]

Good restoration, those 'plastic' trikes aren't my taste but this does demonstrate one thing - they may be fast but they definitely don't stop as quickly! That took an almighty whack in the front to do that much damage but all looks good now.

[Baddon]

Thats a super job. Looks far better then the original yellow.

The work you put in is very good. WELL DONE and enjoy the trike, they are awesome.

[tiitvp]

Back Axle

All the uniball joints and bearings where in bad contition. So i removed back axels, measured everything and ordered new parts.
Back brakes where ok.
When i but it back together i finded myself to be stupid. I know how to make car drive straight but how it is with trike ??
Right now i mesured from frame that back of the wheel is at same dictance as front of the wheel.
Do there need to be somekind of degree with both wheels ?

2016-04-28 20.55.08.jpg

[tiitvp]

Back Wheels

Back wheels needed restoration. Straigthen , sanding, littlepit chemical metal to fill some small holes.
Painted with 2 colors same as trike body. Allsou new tires.

2016-03-26 17.00.47.jpg

2016-03-26 17.00.55.jpg

2016-03-26 17.00.552.JPG