Hermans winter work.

Deep Diver · Post by **Deep Diver** » Wed Mar 20, 2019 11:00 am

Found the strip on ebay. They do it in a few colours to.

https://www.ebay.co.uk/itm/Glass-Edge-T ... 2749.l2649

Andy from Sandy · Post by **Andy from Sandy** » Wed Mar 20, 2019 4:39 pm

Found the strip on ebay.

Thank you. It looks very similar. The picture of your trike it does look to be the stuff that has a metal core. Thank you.

For the sake of a couple of pounds I will get a metre and see how it goes.

Deep Diver · Post by **Deep Diver** » Thu Mar 21, 2019 3:14 pm

Went for a quick blast up the road today and it looks like I still have the oil leak.

Will just run it for now and next winter hope to have a rebuilt spare engine to install.

gorbee01279 · Post by **gorbee01279** » Thu Mar 21, 2019 3:51 pm

Deep Diver wrote: ↑Thu Mar 21, 2019 3:14 pm Went for a quick blast up the road today and it looks like I still have the oil leak. Will just run it for now and next winter hope to have a rebuilt spare engine to install.

What a bummer,we aint having much luck with these vw trikes aye Barry

Deep Diver · Post by **Deep Diver** » Fri Mar 29, 2019 6:17 pm

Right been not much to do this week. But next week all going well will have the stainless rear frame made up. Also picked up a good vw crankcase set with the 2 pressure relief valves off eBay. They need line boring and this will be the start of a engine rebuild later this year.

Deep Diver · Post by **Deep Diver** » Wed Apr 03, 2019 7:00 pm

Right got wet today riding to the welding workshop. Rear frame all made up but no pics
as to busy fabricating the parts. Will post pictures at the weekend.

Deep Diver · Post by **Deep Diver** » Thu Apr 11, 2019 6:58 pm

And another day at the welding shop. Here is last weeks work. The rear frame was removed and a new one fabricated from 50mm stainless tube and welded up.

Today we did the pannier frames on the side. Both days it took all day as the body had to be removed and the fuel tank to.

All I have to do now is loads of smoothing and polishing of the welds.

gorbee01279 · Post by **gorbee01279** » Thu Apr 11, 2019 7:13 pm

Looking good M8

.

Aztec · Post by **Aztec** » Thu Apr 11, 2019 7:39 pm

Cracking job there Barry

jinjachin · Post by **jinjachin** » Thu Apr 11, 2019 7:45 pm

nice job that nice pro 5 in the back ground too lol

UK Triker Forums

Discussion forum for all things trike. A massive technical resource for both purchased and ground up builds.

Hermans winter work.

Re: Hermans winter work.

Re: Hermans winter work.

Re: Hermans winter work.

Re: Hermans winter work.

Re: Hermans winter work.

Re: Hermans winter work.

Re: Hermans winter work.

Re: Hermans winter work.

Re: Hermans winter work.

Re: Hermans winter work.