Finally thought i was getting somewhere.
-
- Member
- Posts: 13
- Joined: Thu Jun 20, 2019 4:10 pm
Finally thought i was getting somewhere.
Thought i was getting somewhere on my Bandit 600 trike and was just going to take it for a test ride before i strip and paint but ive made one total bollox up. Ive used a bevel box to convert it from chain to shaft drive. It moves but one massive problem. Its goes in reverse. Does anyone know if its as simple as just flipping the relaint axle over or have i just cocked it up completly.
-
- Moved in and now we can't get rid
- Posts: 1837
- Joined: Fri Mar 09, 2012 10:06 pm
- Location: Midsomer Norton. Bath
Re: Finally thought i was getting somewhere.
Not sure but i think you can flip them but you may have to alter the breather. someone here will know for sure.
- lepchaun
- Moved in and now we can't get rid
- Posts: 5353
- Joined: Sat May 29, 2010 8:20 am
- Location: worksop notts
Re: Finally thought i was getting somewhere.
flip it then drill a breather mine had to be flipped for the goldwing
-
- Newbie
- Posts: 5
- Joined: Mon Aug 10, 2020 1:20 pm
Re: Finally thought i was getting somewhere.
I flipped mine for my xv trike its dead easy
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: Finally thought i was getting somewhere.
what every one else said
-
- Part of the Furniture
- Posts: 813
- Joined: Sun Aug 28, 2011 4:51 pm
Re: Finally thought i was getting somewhere.
Or leave it as it is, turn the whole trike around and steer from the rear LOL!
-
- Member
- Posts: 13
- Joined: Thu Jun 20, 2019 4:10 pm
Re: Finally thought i was getting somewhere.
Cheers guys> flipped it and she now goes forwards. Now to check it over before a proper spin.
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: Finally thought i was getting somewhere.
dont forget to drill breather holes