the old man come out of hospital on friday hes had two stents fitted . so been in the garage today and got the engine all done
these are the reason the starter doesnt work the old ones were full of crud
they sit in here the straws are to hold the rollers back while i put it back on the shaft
then all back together
operation jinja wing
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: operation jinja wing
You do not have the required permissions to view the files attached to this post.
- AngeloftheAbyss
- Part of the Furniture
- Posts: 990
- Joined: Thu May 11, 2017 9:14 pm
- Location: County Durham
- Contact:
Re: operation jinja wing
Are you sure you're not drinking through those straws?
Freedom has a price, the cost is buried in the ground
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: operation jinja wing
been working on the engine at work plastered it with paint stripper then steamed it of the only problem is ive blown the glass out of the oil level and caint find it and i caint find one for sale eather .
i brought some engine paint called aluminium no 9 and i am really chuffed its come out really well it better than the photos show
i also went in the garage stripping more off the bike
i brought some engine paint called aluminium no 9 and i am really chuffed its come out really well it better than the photos show
i also went in the garage stripping more off the bike
You do not have the required permissions to view the files attached to this post.
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: operation jinja wing
ive got a new laptop and im having trouble putting the correct pics on in the right order so you will have to bear with me
all ive got to do is polish the ali covers and fit a new belt cover gasket which is £46 what a rip off
all ive got to do is polish the ali covers and fit a new belt cover gasket which is £46 what a rip off
You do not have the required permissions to view the files attached to this post.
-
- Moved in and now we can't get rid
- Posts: 3550
- Joined: Sun Jan 29, 2017 12:17 pm
- Location: Felixstowe
Re: operation jinja wing
Jin, hope you're keeping a tally of the cost to charge your boy.
I tried to be normal once, worst two minutes of my life.
Barry the cantankerous old goat.
Barry the cantankerous old goat.
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: operation jinja wing
its mouting up i was going to do this as cheep as i could but ive decided to put more in now and it last longer before it needs doing again . ive got my head set on the project now if you know what i mean so its got to be done to the best of my ability as i want it nice its the only way i can do a project this big the trouble is i have trouble sleeping as i caint switch it off . thats why i dont draw what im aiming for as its all in my head im on the swing arm next ive got some working out how im going to do it . how far over the original axle center does every one fix the axle i dont want it to far back as i dont like the look but i know i will have excessive uj wear the closer i have the axle as im not going to shorten it plus what is the best way to make sure axle is central and squire
-
- Part of the Furniture
- Posts: 475
- Joined: Tue Jul 08, 2014 10:06 pm
- Location: Coventry
Re: operation jinja wing
Keeps the old grey matter working!
- lepchaun
- Moved in and now we can't get rid
- Posts: 5346
- Joined: Sat May 29, 2010 8:20 am
- Location: worksop notts
Re: operation jinja wing
jinj when u come up on sunday u can do a load of measuring and photos off mine I know there different bikes but the swing arm should b the same lent I would think also give terry t a pm he has a 1200 and a 1500
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: operation jinja wing
spent 1 1/2 hr on the polisher doing these two got the other two to do then the engine will go on the shelf at work till its time to go in the trike
You do not have the required permissions to view the files attached to this post.
-
- Part of the Furniture
- Posts: 314
- Joined: Wed May 30, 2018 7:06 pm
Re: operation jinja wing
hu jinge re that glass i have some perspex which is 5mm thick so could be cut to fit if you want i can send you some