Secondary fuel tank

[jinjachin]

i would put a tap on the second fuel tank if you put it on a tee piece your higher tank might over flow your lower tank

[dave174]

i would put a tap on the second fuel tank if you put it on a tee piece your higher tank might over flow your lower tank

I was thinking of using the original as the reserve tank Jinge. I wouldn't turn the tap on till other is almost empty. But I am putting a tap inline on the new line anyway.

[lepchaun]

looks great dave

[dave174]

All running OK from 2nd tank. Next question is where to put a breather hole? The filler cap I have is just a weld on neck and screw cap. Would itbeok to drill a small hole in the neck, just below the cap or drill a small hole in the cap?

[dave174]

Screenshot_20200919_141840_com.ebay.mobile.jpg

[Deep Diver]

A very small hole in the cap should be ok, no bigger than 1 mm. Has the cap got a cork or rubber gasket inside, if so you'll need a hole in that but not in line with the cap hole.

[dave174]

IMG_20200919_142816.jpg

Just an o ring Barry

[1130cc]

All running OK from 2nd tank. Next question is where to put a breather hole? The filler cap I have is just a weld on neck and screw cap. Would itbeok to drill a small hole in the neck, just below the cap or drill a small hole in the cap?

I have, what looks like, the same neck/cap.
I drilled a 1mm hole in the cap.

[dave174]

Thanks Barry and Sean. Drilled hole and took it for a 10 mile test run. No problems

[lepchaun]

Will u be able to fill both tanks and ride all those miles in one the ace cafe and back on one fill