I built the trans myself. I can do it again.
It has a bunch of hot rod parts in it. Was supposed to handle a 200hp input. I put around 225 into it multiple times with everything it has.
The aftermarket hub on 3-4 failed. It did not scatter/strip gears/quit working. I am told by the race trans shop that the aftermarket hub assembly I put in it is not a good unit. Was told the slider is excellent but that hub is softer than original. So keep everything else and swap the hub to a harder unit.
So after all those hard pulls it did not seem right but still worked. I broke the sychro rings by continuing to drive it....collateral damage
15237318229700.jpg
I doubt I will ever make any more full power dyno pulls.
It is much easier to accelerate the scooter than to accelerate that dyno. With a better hub in there I doubt it will break again.
You do not have the required permissions to view the files attached to this post.