EC215E52-4DA4-41F6-9B22-09EA9EC8AD6B.jpeg
This is the sort of rake / trail you need - as per Trike Doctor Marc Geraghty made for me. Surgery only answer doc for that front endBit of Technical help required.
- Ghoulie
- Moved in and now we can't get rid
- Posts: 1029
- Joined: Tue Sep 12, 2006 12:15 pm
- Location: manchester way
- Contact:
Re: Bit of Technical help required.
This is the sort of rake / trail you need - as per Trike Doctor Marc Geraghty made for me. Surgery only answer doc for that front end
You do not have the required permissions to view the files attached to this post.
-
- Moved in and now we can't get rid
- Posts: 5538
- Joined: Thu Oct 04, 2012 11:24 am
- Location: old hill
Re: Bit of Technical help required.
i never noticed that very strangeKawazuki wrote: ↑Fri Oct 22, 2021 11:41 am Sorry I have to ask, but along with all its other faults ! ! ! is this actually registered and road going? The reason I ask as the apparent total lack of front brakes !
I've just checked with the MSVA manual and the MOT Testers Manuals and both refer to front brake requirements ! ! ! I'm starting to dislike this even more!
- Doc.
- Moved in and now we can't get rid
- Posts: 1942
- Joined: Sun Nov 22, 2009 1:12 pm
- Location: South BUCKS
Bit of Technical help required.
It does look like it has no Brake on the Front from those photos, doesn't it!
It does have one though, as you can see by the Handlebar Lever & M/C Unit.
You can see the Braided Hose on the first photo too.
On the subject of Brakes, I'm planning to do away with the front M/C, and link it into the Foot Brake Circuit, through an adjustable Bias Valve, any thoughts on that?
Well, I took it out for a brief ride a few days ago.
I think the Steering is actually not too bad.
Yes, it shakes it head at low speeds on the crappy bumpy roads round the owner's house, but out on the open road it seems pretty good to me.
I'll be rebuilding the Steering arrangement, with a remote Bar set-up.
It won't alter the feel much, but will get rid of the need for Orangutan arms to steer round tight corners!!
Engine needs a once over, particularly the Carbs.
There's nothing between tickover and around 3000rpm, makes pulling away a screaming, clutch-slipping affair.
Not knowing it's service history, I'll strip and check everything.
Has anyone had a complete Engine Vapour/Aqua-Blasted?
Will be fitting an Acewell or Koso Dash, any experience with these on older (non EFI) Bikes/Trikes?
It does have one though, as you can see by the Handlebar Lever & M/C Unit.
You can see the Braided Hose on the first photo too.
On the subject of Brakes, I'm planning to do away with the front M/C, and link it into the Foot Brake Circuit, through an adjustable Bias Valve, any thoughts on that?
Well, I took it out for a brief ride a few days ago.
I think the Steering is actually not too bad.
Yes, it shakes it head at low speeds on the crappy bumpy roads round the owner's house, but out on the open road it seems pretty good to me.
I'll be rebuilding the Steering arrangement, with a remote Bar set-up.
It won't alter the feel much, but will get rid of the need for Orangutan arms to steer round tight corners!!
Engine needs a once over, particularly the Carbs.
There's nothing between tickover and around 3000rpm, makes pulling away a screaming, clutch-slipping affair.
Not knowing it's service history, I'll strip and check everything.
Has anyone had a complete Engine Vapour/Aqua-Blasted?
Will be fitting an Acewell or Koso Dash, any experience with these on older (non EFI) Bikes/Trikes?
-
- Moved in and now we can't get rid
- Posts: 3560
- Joined: Sun Jan 29, 2017 12:17 pm
- Location: Felixstowe
Re: Bit of Technical help required.
I had a bmw boxer engine blasted years ago, but it was a stripped down one. Some places now do soda blasting as it washes right off
I tried to be normal once, worst two minutes of my life.
Barry the cantankerous old goat.
Barry the cantankerous old goat.
- Doc.
- Moved in and now we can't get rid
- Posts: 1942
- Joined: Sun Nov 22, 2009 1:12 pm
- Location: South BUCKS
Bit of Technical help required.
Soda Blasting will get rid of the flaky paint, but I've read that Aqua/Vapour Blasting 'seals' the surfaces (like Shot Peening), so you can leave the surfaces bare, without them corroding so readily.
- Doc.
- Moved in and now we can't get rid
- Posts: 1942
- Joined: Sun Nov 22, 2009 1:12 pm
- Location: South BUCKS
Bit of Technical help required.
Hope everyone had a good Christmas.
Not done much to the Trike yet, just collecting parts for it mostly.
Did replace the Front Tyre with a Car one, we'll see how that works out at some point.
Moved it from the owner's Driveway, to a Farm down the road, where a friend rents a small Barn Unit, so I can work on it out of the weather, and be able to leave Tooling/Parts etc with it.
I'll post progress as it's made . . .
Not done much to the Trike yet, just collecting parts for it mostly.
Did replace the Front Tyre with a Car one, we'll see how that works out at some point.
Moved it from the owner's Driveway, to a Farm down the road, where a friend rents a small Barn Unit, so I can work on it out of the weather, and be able to leave Tooling/Parts etc with it.
I'll post progress as it's made . . .