Ok have now made up my mind. I am going to build the trike with an independent suspension axle.
I will start to get the parts sorted out and ordered .
One question I have, will 25mm square tubing be big enough, or do I need to use thicker tube.
VN800 trike.
-
- Part of the Furniture
- Posts: 659
- Joined: Wed Mar 14, 2012 7:17 am
- Location: Skegby,Nottinghamshire
Re: VN800 trike.
This will all depends on build design length of the sections.are you still going with a West Wales set up ? Or are you building your own ?are you converting you trike you have now if so post some photos so we can picture what you want to achieve.
-
- Member
- Posts: 34
- Joined: Sat Oct 08, 2011 10:09 am
Re: VN800 trike.
Hi.
I am still going for the west wales trike set up, but I an going to use my VN800.
I want to keep the trike length about the same as now, so the rear chain sprocket should sit were it does now or as near as dam it.
will post some pictures of both the trike and the VN this week.
I am still going for the west wales trike set up, but I an going to use my VN800.
I want to keep the trike length about the same as now, so the rear chain sprocket should sit were it does now or as near as dam it.
will post some pictures of both the trike and the VN this week.